Skip to main content

ads by google

Complete and professional tutorials to Hack WPA/WPA2 Wifi

All Posts Install Kali Linux In VMware How To Crack WPA/WPA2 with Kali Kali.org Disclaimer

How To Hack WPA/WPA2 Wi-Fi With Kali Linux & Aircrack-ng


Written by Shudarshan Kali Linux can be used for many things, but it probably is best known for its ability to penetration test, or “hack,” WPA and WPA2 networks. There are hundreds of Windows applications that claim they can hack WPA; don’t get them! They’re just scams, used by professional hackers, to lure newbie or wannabe hackers into getting hacked themselves. There is only one way that hackers get into your network, and that is with a Linux-based OS, a wireless card capable of monitor mode, and aircrack-ng or similar. Also note that, even with these tools, Wi-Fi cracking is not for beginners. Playing with it requires basic knowledge of how WPA authentication works, and moderate familiarity with Kali Linux and its tools. If you feel you have the necessary skills, let’s begin:
These are things that you’ll need:
  • A successful install of Kali Linux (which you probably have already done). If not, follow my tutorial here: http://lewiscomputerhowto.blogspot.com/complete-guide-on-how-to-install-kali.html
  • A wireless adapter capable of injection/monitor mode. Some computers have network cards capable of this from the factory. If you’re, like most however, you’ll have to buy an external one. Here is a list of the best: http://blackmoreops.com/recommended-usb-wireless-cards-kali-linux
  • A wordlist to attempt to “crack” the password once it has been captured
  • Time and patients
  • If you have these then roll up your sleeves and let’s see how secure your network is!

    Important notice:

    Hacking into anyone’s Wi-Fi without permission is considered an illegal act or crime in most countries. We are performing this tutorial for the sake of penetration testing, hacking to become more secure, and are using our own test network and router.
    By reading and/or using the information below, you are agreeing to our Disclaimer

    Step One:


    Start Kali Linux and login, preferably as root.
    Step 1

    Step 1

    Step Two:


    Plugin your injection-capable wireless adapter, (Unless your native computer wireless card supports it). If you’re using Kali in VMware, then you might have to connect the card via the imageicon in the device menu.

    Step Three:


    Disconnect from all wireless networks, open a Terminal, and type airmon-ng
    Step 3 Step 3
    This will list all of the wireless cards that support monitor (not injection) mode. If no cards are listed, try disconnecting and reconnecting the adapter (if you’re using one) and check that it supports monitor mode. If you’re not using an external adapter, and you still don’t see anything listed, then your card doesn’t support monitor mode, and you’ll have to purchase an external one (see the link in the requirements). You can see here that my card supports monitor mode and that it’s listed as wlan0.

    Step Four:


    Type airmon-ng start followed by the interface name of your wireless card. mine is wlan0, so my command would be: airmon-ng start wlan0
    [Step-43.png] Step 4
    The “(monitor mode enabled)” message means that the card has successfully been put into monitor mode. Note the name of the new monitor interface, mon0.
    EDIT: A bug recently discovered in Kali Linux makes airmon-ng set the channel as a fixed “-1” when you first enable mon0. If you receive this error, or simply do not want to take the chance, follow these steps after enabling mon0:
    Type: ifconfig [interface of wireless card] down and hit Enter. Replace [interface of wireless card] with the name of the interface that you enabled mon0 on; probably called wlan0. This disables the wireless card from connecting to the internet, allowing it to focus on monitor mode instead. After you have disabled mon0 (completed the wireless section of the tutorial), you’ll need to enable wlan0 (or name of wireless interface), by typing: ifconfig [interface of wireless card] up and pressing Enter.

    Step Five:


    Type airodump-ng followed by the name of the new monitor interface, which is probably mon0.
    Step 5 Step 5 If you receive a “fixed channel –1” error, see the Edit above.

    Step Six:


    Airodump will now list all of the wireless networks in your area, and a lot of useful information about them. Locate your network or the network that you have permission to penetration test. Once you’ve spotted your network on the ever-populating list, hit Ctrl + C on your keyboard to stop the process. Note the channel of your target network.
    step 6 step 6

    Step Seven:


    Copy the BSSID of the target network Step 7 Step 7 Now type this command:
    airodump-ng -c [channel] --bssid [bssid] -w /root/Desktop/ [monitor interface] Replace [channel] with the channel of your target network. Paste the network BSSID where [bssid] is, and replace [monitor interface] with the name of your monitor-enabled interface, (mon0). The “–w” and file path command specifies a place where airodump will save any intercepted 4-way handshakes (necessary to crack the password). Here we saved it to the Desktop, but you can save it anywhere.
    A complete command should look similar this:
    airodump-ng -c 10 --bssid 00:14:BF:E0:E8:D5 -w /root/Desktop/ mon0 image image Now press enter.

    Step Eight:


    Airodump with now monitor only the target network, allowing us to capture more specific information about it. What we’re really doing now is waiting for a device to connect or reconnect to the network, forcing the router to send out the four-way handshake that we need to capture in order to crack the password.
    Also, four files should show up on your desktop, this is where the handshake will be saved when captured, so don’t delete them!
    But we’re not really going to wait for a device to connect, no, that’s not what impatient hackers do. We’re actually going to use another cool-tool that belongs to the aircrack suite called aireplay-ng, to speed up the process. Instead of waiting for a device to connect, hackers can use this tool to force a device to reconnect by sending deauthentication (deauth) packets to one of the networks devices, making it think that it has to reconnect with the network.
    Of course, in order for this tool to work, there has to be someone else connected to the network first, so watch the airodump-ng and wait for a client to show up. It might take a long time, or it might only take a second before the first one shows. If none show up after a lengthy wait, then the network might be empty right now, or you’re to far away from the network.
    You can see in this picture, that a client has appeared on our network, allowing us to start the next step.
    Step 8 Step 8

    Step Nine:


    Leave airodump-ng running and open a second terminal. In this terminal, type this command:
    aireplay-ng –0 2 –a [router bssid] –c [client bssid] mon0
    The –0 is a short cut for the deauth mode and the 2 is the number of deauth packets to send. -a indicates the access point/router’s BSSID, replace [router bssid] with the BSSID of the target network, which in my case, is 00:14:BF:E0:E8:D5.
    -c indicates the client’s BSSID, the device we’re trying to deauth, noted in the previous picture. Replace the [client bssid] with the BSSID of the connected client, this will be listed under “STATION.” And of course, mon0 merely means the monitor interface, change it if yours is different.
    My complete command looks like this:
    aireplay-ng –0 2 –a 00:14:BF:E0:E8:D5 –c 4C:EB:42:59:DE:31 mon0 Step 9 Step 9

    Step Ten:


    Upon hitting Enter, you’ll see aireplay-ng send the packets. If you were close enough to the target client, and the deauthentication process works, this message will appear on the airodump screen (which you left open):
    image image image

    step 10:


    This means that the handshake has been captured, the password is in the hacker’s hands, in some form or another. You can close the aireplay-ng terminal and hit Ctrl + C on the airodump-ng terminal to stop monitoring the network, but don’t close it yet just incase you need some of the information later.
    If you didn’t receive the “handshake message,” then something went wrong in the process of sending the packets. Unfortunately, a variety of things can go wrong. You might just be too far away, and all you need to do is move closer. The device you’re attempting to deauth might not be set to automatically reconnect, in which case you’ll either have to try another device, or leave airodump on indefinitely until someone or something connects to the network. If you’re very close to the network, you could try a WiFi spoofing tool like wifi-honey, to try to fool the device into thinking that you’re the router. However, keep in mind that this requires that you be significantly closer to the device than the router itself. So unless you happen to be in your victim’s house, this is not recommended.
    Do note that, despite your best efforts, there are many WPA networks that simply can’t be cracked by these tools. The network could be empty, or the password could be 64 characters long, etc.

    Step 11:


    This concludes the external part of this tutorial. From now on, the process is entirely between your computer, and those four files on your Desktop. Actually, it’s the .cap one, that is important. Open a new Terminal, and type in this command:
    aircrack-ng -a2 -b [router bssid] -w [path to wordlist] /root/Desktop/*.cap
    -a is the method aircrack will use to crack the handshake, 2=WPA method.
    -b stands for bssid, replace [router bssid] with the BSSID of the target router, mine is 00:14:BF:E0:E8:D5.
    -w stands for wordlist, replace [path to wordlist] with the path to a wordlist that you have downloaded. I have a wordlist called “wpa.txt” in the root folder.
    /root/Desktop/*.cap is the path to the .cap file containing the password. The * means wild card in Linux, and since I’m assuming that there are no other .cap files on your Desktop, this should work fine the way it is.
    My complete command looks like this:
    aircrack-ng –a2 –b 00:14:BF:E0:E8:D5 –w /root/wpa.txt /root/Desktop/*.cap
    image image Now press Enter.

    Step 12:


    Aircrack-ng will now launch into the process of cracking the password. However, it will only crack it if the password happens to be in the wordlist that you’ve selected. Sometimes, it’s not. If this is the case, you can try other wordlists. If you simply cannot find the password no matter how many wordlists you try, then it appears your penetration test has failed, and the network is at least safe from basic brute-force attacks.
    Cracking the password might take a long time depending on the size of the wordlist. Mine went very quickly.
    If the phrase is in the wordlist, then aircrack-ng will show it too you like this: image image The passphrase to our test-network was “notsecure,” and you can see here that it was in the wordlist, and aircrack found it. If you find the password without a decent struggle, then change your password, if it’s your network. If you’re penetration testing for someone, then tell them to change their password as soon as possible.

    Comments

    Popular posts from this blog

    Download Nmap,txt,Pdf file from download button: A Guide To Port Scanning Using Nmap In TCP, ports are the ends of logical connections which are used for carrying long term conversations. And, Port Scanning is the process of acquiring information on the open and closed ports in systems, mainly with the purpose of getting information on what services and software are running behind them. 8 Nmap is a commonly used software for Port Scanning. In this article, I would explain how to use nmap for Port Scanning. Numbering of Ports Ports are specified by numbers ranging from 1 to 65535. Out of these port numbers, port numbers -> 0 – 1023 are used by various services of the Operating Systems. -> 1024 – 49151 are registered to be used by certain services. -> 49152 – 65535 are not registered and can be used for private use. Installing nmap In a Linux system, nmap can be easily installed following a few steps. For example, in Ubuntu, it can be in
    How to use Termux App for Android : Terminal Emulator and Linux environment Termux is an Android terminal emulator and Linux environment app that works directly with no rooting or setup required. A minimal base system is installed automatically.Additionall packages are available using the APT package manager. Developer: Fredrik Fornwall Download link: Steps and Instructions : 1.Download Termux app and install it.Open Termux and wait for its complete installation. 2.Now, for first time you need to use this command (as shown in screenshot): apt update 3.Now,we can use apt command.To know how to use apt , click on Help in Termux app (Long press in Termux Terminal window will bring menu ) 4.To get list of available packages,use this command: apt list 5.To install any package,say python ,use this command: apt install python 5.To search any package,say python. Use this command: apt search python 6.To remove/uninstall a package,say python , use